
250
GENERAL OPERATION
TOYOTA IMMOBILISER—REMOTES—TYPE 2
COMPATIBLE TRANSPONDER KEYS FOR THESE MODEL’S
Procedure
1. Open the driver’s door.
2. Within 5 seconds, put the remote into the remote opening and remove 2
times
3. Close the drivers door and open again 2 times
4. Put the remote in the remote opening and remove
5. Close the drivers door and open again 2 times
6. Out the remote in the remote opening and close ALL doors.
7. Turn the Power switch on for 1 second and then off.
8. Remove remote from remote opening.
9. The power door locks should now cycle 1 time.
10. Press the unlock and lock buttons at the same time for 1 second and then
quickly press the unlock button for 1 second.
11. If the remote has been accepted the door locks should cycle once. If failed
the door locks will cycle 2 times.
12. Open drivers door to end procedure.
23
TOYOTA FACTORY REMOTE MASTER KEYS
MODEL YEARS FACTORY PART NOTES
Prius 2004 Smart Access System
NOTE : IF YOU ARE USING THE WRONG TYPE OF KEY, THE PROCEDURES
WILL NOT WORK.
NO AFTERMARKET KEYS WILL WORK FOR THESE MODEL TYPES.
PLEASE USE ORIGINAL KEYS ONLY
Komentarze do niniejszej Instrukcji