Daewoo AD100 Dokumentacja Pobierz pdf (Strona 256)

256

GENERAL OPERATION

LEXUS IMMOBILISER—REMOTE CONTROL(On board)

ADD REMOTE

Procedure

1. Make sure no keys are in the ignition lock and the drivers door is

open and unlocked.

2. Within 4-5 seconds put the key in the ignition and remove 2 times.

3. Close the drivers door and open 2 times.

4. Put the key in the ignition and remove.

5. Close the drivers door and open 2 times.

6. Put the key in the ignition and close all doors.

7. Turn the ignition ON for 1 second then OFF.

8. Remove the key from the ignition.

9. The power locks should now cycle once.

10. Press the unlock and lock buttons at the same time for 1 second and

then quickly press the unlock and lock buttons for 1 second again.

11. If the remote is programmed the doors will cycle once. If failed the

doors will cycle 2 times.

12. Open drivers door to end procedure.

ERASE REMOTE

Procedure

1. Make sure no keys are in the ignition lock and the drivers door is

open and unlocked.

2. Within 4-5 seconds put the key in the ignition and remove 2 times.

3. Close the drivers door and open 2 times.

4. Put the key in the ignition and remove.

5. Close the drivers door and open 2 times.

6. Put the key in the ignition and close all doors.

7. Turn the ignition ON for 1 second then OFF, then back onto ON for 1

second and then OFF.

8. Remove the key from the ignition.

9. The power locks should now cycle 2 times

10. Press the unlock and lock buttons at the same time for 1 second and

then quickly press the unlock and lock buttons for 1 second.

11. If the remote is programmed the doors will cycle once. If failed the

doors will cycle 2 times.

12. Open drivers door to end procedure.

1 2 ... 251 252 253 254 255 256 257 258 259 260 261 ... 277 278

Brak uwag

Daewoo AD100 Dokumentacja Strona 256